Still Image Operations; Preparations - Sony MVS-8000X System User Manual

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

Still Image Operations

The frame memory functions provides the following still image file functions.

• Freezing an input image

• Saving a still image

• Recalling a still image

• Processing an image

• Continuously capturing images (record)

• Recalling a continuous sequence of images (animation)

For an overview of frame memory concepts, see "Overview" (page 298).

During playback of a frame memory clip of the pair assigned to either of the

target FM selection buttons (see page 323), frame memory operations may not

be performed properly. Carry out frame memory operations after stopping clip

Allocating the frame memory outputs (FM1 to FM8) to cross-

point buttons

To output a frame memory image to a monitor, for example, the output signal

from the frame memory (FM1 to FM8) must be allocated to a cross-point

button. Carry out this allocation in the Setup menu.

When the signal format is 1080P, only the four options of FM1 to FM4 can be

Accessing the Frame Memory menu

Most frame memory operations are carried out using the Frame Memory menu.

To access the Frame Memory menu, use either of the following procedures.

• In the menu control block, select the top menu selection button [FRAME

• Press the cross-point button to which the frame memory output is allocated

twice in rapid succession.

Still Image Operations