Signal Assignment And Selection - Sony MVS-8000X System User Manual

Bank
Auxiliary
bus control
block
a) To turn on the [DME1] to [DME4] buttons requires one of the [KEY1] to [KEY8] and [DSK1]
to [DSK8] buttons to be on.
b) An assignment is required for keys 5 to 8.
c) An assignment to the delegation buttons is required in setup, to assign the bus for operations.

Signal Assignment and Selection

Assigning signals to buttons
Each cross-point button has a button number, to which you assign a signal.
In addition to the signals input to the PRIMARY INPUTS 1 to 144 connectors,
the PREMIUM INPUTS 1 to 20 connectors, or the FC INPUTS 1 to 16
connectors on the rear panel of the switcher, you can also select signals
generated within the switcher.
110
Signal Selection
Bus name
AUX1 to AUX48 buses The key row of
Frame memory source
c)
1 and frame memory
source 2 buses
DME 1 to DME 4
video buses
DME 1 to DME 4 key
buses
Edit preview bus
M/E-1 UTILITY 1 and
M/E-1 UTILITY 2
buses
P/P UTILITY 1 and P/
P UTILITY 2 buses
M/E-1 Key 1 fill to M/
E-1 Key 8 fill buses
M/E-1 Key 1 source to
M/E-1 Key 8 source
buses
DSK 1 fill to DSK 8 fill
buses
DSK 1 source to DSK
8 source buses
M/E-1 external DME
bus
P/P external DME bus
DME UTILITY 1 and
DME UTILITY 2 buses
Cross-point Delegation operation
button row
Turn on the appropriate
the bank selected buttons in accordance with
with the bank the signal assignment made
selection buttons
in the Setup menu.
in the auxiliary
bus control block