Setting The Output Signal - Sony MVS-8000X System User Manual

2
3
4

Setting the Output Signal

In the following adjustment/setting operations, use any of the following
methods to select the output signal before making the setting.
1038
Signal Output Settings (Output Menu)
In the <Output Assign> group, select either of the following.
[Re-Entry Source]: It is possible to make duplicate assignments.
M/E-1 Output 1 to 6
M/E-2 Output 1 to 6
M/E-3 Output 1 to 6
M/E-4 Output 1 to 6
a)
PGM/PST 1 to 6
M/E-1 to 4 Proc Video
P/P Proc Video
M/E-1 to 4 Proc Key
P/P Proc Key
DME Monitor Video
DME Monitor Key
Color Corrector 1 and 2
Undefined
Color Bkgd 2
a) M/E output signals selected in the M/E Output Assign menu.
[Aux Bus]: It is not possible to make duplicate assignments.
Preset
Edit Preview
AUX 1 to 48
Using any of the following methods, select the output port number and
signal to be assigned.
• Press directly on the list in the status area to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 Output No Output port number
2 Source No Selection of signal to be assigned 1 and upwards
• For output ports not to be assigned, press [Inhibit].
The selected signal appears in reverse video.
Press [Set] to confirm the assignment.
a)
a)
a)
a)
Setting values
1 to 48