Sony MVS-8000X System User Manual page 385

2
In the <Spot CCR> group, press [Spot CCR], turning it on.
3
In the <Auto> group, press [Sample Mark], turning it on.
Notes
When [Sample Mark] is on, the effects of color adjustment outside the
region of spot color adjustment (see page 386) and output video processing
(see page 387) are temporarily disabled.
Turning [Sample Mark] off restores the former state.
4
Adjust the parameters so that the color you want to change is included
within the sample mark.
Knob Parameter
1 Position H
2 Position V
3 Size
5
In the <Auto> group, press [Auto Start], to adjust the key automatically.
Notes
This automatic adjustment does not carry out key gain adjustment. If
required, adjust the key gain as shown in step 6.
6
Press [Key Adjust], and adjust the following parameters.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Gain
7
Press [Window], turning it on, to adjust the key detection range for spot
color adjustment.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
Adjustment
Horizontal position
Vertical position
Size
Adjustment
Luminance
Saturation
Hue
Key gain
Adjustment
Luminance
Saturation
Hue
Setting values
–100.00 to +100.00
–100.00 to +100.00
1.00 to 100.00
Setting values
–7.31 to +109.59
0.00 to 100.00
359.99 to 0.00
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Color Corrector Functions
385