Displaying A Menu - Sony MVS-8000X System User Manual

Buttons
a)
DME1 to DME8
DEV1 to DEV12 assigned
buttons
FM1CLIP to FM8CLIP
assigned buttons
d)
K1RSZ to K8RSZ
a) When the three-dimensional transformation operation mode is enabled.
b) When the [MENU] button is Off.
c) When the [MENU] button is On.
d) When the resizer control mode is enabled.
Buttons
DEV1 to DEV12
FM1CLIP to FM8CLIP
assigned buttons
a) When the [TIMELINE] button is Off.
b) When the [TIMELINE] button is On.

Displaying a Menu

To display, for example, the M/E-1 >Key1
>Type menu, use either of the following
operations.
• Press the top menu selection button [M/E
1], then press the VF1 'Key1' button and
the HF1 'Type' button in that order.
• Press the menu page number button in the
upper left corner of the menu screen to
display the top menu window, then enter
the page number of the M/E-1 >Key1
>Type menu, which is 1111, and press
the [Enter] button. (For details of the
menu page numbers, see "Menu Tree"
(page 434).)
The M/E-1 >Key1 >Type menu appears in
the menu display as follows.
Device control block (trackball)
Menus
DME >XX
• Device >DDR/VTR >Cueup & Play
• Device >DDR/VTR >Timeline
Frame Memory >Clip >Recall
• M/E-1, 2, 3, 4 >Key1, 2, 3, 4, 5, 6, 7, 8
>Processed Key
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Processed
Key
Device control block (search dial)
Menus
• Device >DDR/VTR >Cueup & Play
• Device >DDR/VTR >Timeline
Frame Memory >Clip >Recall
See
Chapter 11
(Volume 2)
b)
Chapter 12
c)
(Volume 2)
–
page 210
See
a)
Chapter 12
b)
(Volume 2)
–
Basic Menu Operations
87