Selecting The System Administrator Settings - Xerox Versant 80 Press System Administration Manual

Selecting the System Administrator Settings

System Administrator Login ID and Passcode tips:
The System Administrator's Login ID can be from 1 to 32 characters.
The default Login ID is admin.
The default passcode is 1111.
Creating a new passcode is recommended for stronger security.
Set the passcode after setting the system administrator login ID. The passcode must
be 4-12 characters.
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select Authentication / Security Settings > System Administrator Settings .
5. Select System Administrator Login ID.
a) Select On.
b) Select Keyboard.
c) In the New System Administrator Login ID entry field, type a system administrator
login ID.
d) Select Save.
You must reenter the login ID information a second time.
e) Select Keyboard once more, and in the Re-enter System Administrator Login ID
field, type the same system administrator login ID.
f) Select Save.
6. Select System Administrator's Passcode.
a) Type the new password from 4-12 numeric digits in the New Passcode field.
Note
To set no passcode, leave the passcode blank, and select Save. However, this is
not recommended for security purposes.
b) Retype the same passcode, in the Type Passcode field.
c) Select Save.
The System Administrator Settings screen is displayed.
7. Select Close.
The main Tools screen displays.
8. Exit the administrator mode.
Xerox ® Versant ® 80 Press
System Administration Guide
Authentication / Security Settings (Tools Administrator Mode)
8-3