Xerox Versant 80 Press System Administration Manual page 50

System Settings (Tools Administrator Mode)
Automatic Paper Curl Correction
Your press is designed with an automated setting to control curl; this automated setting
does not require the user to make any Adjust Paper Curl selections. The press
automatically sends paper through the proper decurler, and automatically determines
the amount of pressure needed at the different decurlers in order to reduce the output
curl of the paper.
However, with some print jobs, the output prints may be curled more than you desire
even with the automated control setting of the press. There may be other ways to correct
curl before using the Adjust Paper Curl option; this depends on your press and any
optional devices attached to it, such as the Interface Module.
Paper Curl and The Interface Module or Interface Cooling Module
If your press is equipped with the optional Interface Module or the Interface Cooling
Module, then this is another way to correct paper curl. Both modules are designed with
several automated presettings for controlling paper curl. The amount of curl correction
is automatically set by the module decurler.
If the module's automated curl correction does not fix the paper curl, you can manually
select curl correction from the module's control panel.
Tip
Using the buttons on the module is a quick and easy way to correct curl without using
the Adjust Paper Curl option from Tools > System Settings > Common Service
Settings Maintenance. Another advantage to using the Interface Module or Interface
Cooling Module is that paper curl can be adjusted while the job is printing by simply
pressing one of the buttons on the module control panel.
4-20 Xerox ® Versant ® 80 Press
System Administration Guide