Setting The Copy Defaults; Copy Control; Copy Control Overview - Xerox Versant 80 Press System Administration Manual

System Settings (Tools Administrator Mode)
Uncollated - Default Separator Tray
Output Destination
Face Up/Down Option
Sample Job
Annotations: Stored Comment, Comment on Side 1 and Side 2, Comment - Font Size,
Comment - Font Color
Date: Position on Side 1 and Side 2, Font Size
Page Numbers: Style, Position on Side 1 and Side 2, Font Size
Bates Stamp: Number of Digits, Position on Side 1 and Side 2, Font Size
Tab Shift Margin - Shift Value
Booklet Creation - Default Cover Tray
Covers - Default Front Cover Tray, Default Back Cover Tray
Separators - Default Separator Tray

Setting the Copy Defaults

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Copy Service Settings .
5. Select Copy Defaults.
6. Select the item to be set.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

Copy Control

Copy Control Overview

The options here allow you to select the default settings that relate to the copy operation,
including the following:
4-42 Xerox ® Versant ® 80 Press
System Administration Guide