Enabling The E-Mail Port And Setting Up Tcp/Ip - Xerox Versant 80 Press System Administration Manual

Configure Environment Settings for Scan Services
Item
Host Name and Domain
Name

Enabling the E-mail Port and Setting up TCP/IP

Note
The e-mail configuration also can be performed using CentreWare Internet Services.
Refer to Configure CentreWare Internet Services Settings
Settings.
1. Login as the Administrator.
2. Press the Machine Status button on the press User Interface (UI).
3. Select the Tools tab on the UI.
4. Select System Settings.
5. Select Connectivity & Network Setup > Port Settings .
6. Select Send E-mail.
a) Select Change Settings.
b) Select Port Status then select Change Settings.
c) Select Enabled, and then select Save.
d) Select Close until the Port Settings screen is displayed.
7. From the Port Settings screen, select Receive E-mail.
a) Select Receive E-mail - Port Status.
b) Select Change Settings.
c) Select Enabled, and then select Save.
d) Select Close until the Port Settings screen is displayed.
8. From the Port Settings screen, select E-mail Notification Service.
a) Select E-mail Notification - Port Status.
b) Select Change Settings.
c) Select Enabled, and then select Save.
d) Select Close until the Port Settings screen is displayed.
9. Select Close until the main Tools screen displays.
10. If necessary, set the IP Address; choose one of the following:
To set an IP address, refer to
11-6
Required? Yes / Description and List of Required Services
No / Other
Other Set the host name and domain name of the press
along with the TCP/IP address for the press on the
DNS server. When this is true, the following services
must be configured:
E-mail
Store & Send Link
Print E-mail via SMTP
Print E-mail via POP3
E-mail Notification
Job Completion Notice
Connectivity & Network
and Configuring the E-mail
Setup.
Xerox ® Versant ® 80 Press
System Administration Guide