Selecting Scan To Pc Defaults; Original Size Defaults; Original Size Defaults Overview; Selecting Original Size Defaults - Xerox Versant 80 Press System Administration Manual

System Settings (Tools Administrator Mode)

Selecting Scan to PC Defaults

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Scan Service Settings .
5. Select Scan to PC Defaults.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the default settings for the selected item.
9. Select Save.
The Scan to PC Defaults screen is displayed.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

Original Size Defaults

Original Size Defaults Overview

Use Original Size Defaults to select default original size settings (as displayed on the
Original Size option on the Layout Adjustment tab). Assign an original size to each of
the fourteen buttons. If you frequently scan nonstandard size originals, presetting a
nonstandard size eliminates the need to enter the original size each time a scan is made.
Original Size Defaults includes the following options:
A / B Series: Select from 10 different A and B series sizes.
Inch Size: If you select this option, you can then select from 11 different inch-series
sizes.
Others: Select from fourteen other sizes.
Custom Size: Enter any size. Set the width between 15-432 mm, and the height
between 15-297 mm, in 1 mm increments.

Selecting Original Size Defaults

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Scan Service Settings .
5. Select Original Size Defaults.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the default settings for the selected item.
4-56 Xerox ® Versant ® 80 Press
System Administration Guide