Customizing The User Interface; Customizing The Ui Screens And Buttons; Assigning A Feature; Changing The Default Home Screen - Xerox Versant 80 Press System Administration Manual

System Administrator Overview
2. Select the Device Information tab. The IP Address is listed.

Customizing the User Interface

Customizing the UI Screens and Buttons

The administrator may customize the following features:
Whether certain screens will display or not on the press UI.
Specify when screens may be displayed such as after the press is switched on or when
it exits the Power Saver mode.
The brightness of the screens as they are displayed on the press UI.
The speed of the scroll buttons alongside the screen.
The default language to be used.

Assigning a Feature

1. Log in as the administrator.
2. To access system functions, press the Machine Status button on the UI.
3. To change settings, select the Tools tab.
4. Select System Settings > Common Service Settings.
5. Select Screen / Button Settings. From the list, select the feature you want to set or
change.
6. Select Change Settings.
7. Select the desired setting for the feature.
8. Select Save.
The previous screen displays.
9. Select Close.
The main Tools screen displays.
10. Exit the administrator mode.

Changing the Default Home Screen

Use this procedure to change the screen that will be displayed when the machine is
switched on or when the Energy Saver mode is deactivated.
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Screen / Button Settings.
6. Select Screen Default from the displayed list.
7. Select Change Settings.
1-2 Xerox ® Versant ® 80 Press
System Administration Guide