Essential Tools Procedures; Tools Menu Lists; Main Tools Menu; System Settings Menu List - Xerox Versant 80 Press System Administration Manual

Tools (Administrator Mode)

Essential Tools Procedures

The following is a list of some of the essential Tools procedures:
For Finisher Adjustment > Adjust Fold Position , refer to
For Finisher Adjustment > DFA Finisher Profiles , refer to
For correcting / adjusting the paper curl, refer to
For HFSI counters, refer to
For Auto Alignment, Density Uniformity, and Image Transfer, refer to the
Image Quality Adjustment (SIQA)
Calibrating the Press for Copy and Scan Jobs
Cleaning the Fuser Assembly

Tools Menu Lists

Main Tools Menu

The press has many factory default settings which can be customized. The following
tables provide a quick reference of the various features and options that can be set or
changed while logged in as administrator. The features/options may vary depending
on the press configuration and any optional hardware or software installed.
Tools

System Settings Menu List

System Settings
3-2
Adjust Paper Curl
Resetting a High Frequency Service Item (HFSI) Counter
section of this guide
System Settings
Setup & Calibration
Accounting
Authentication / Security Settings
Common Service Settings
Copy Service Settings
Connectivity & Network Setup
Scan Service Settings
E-mail Service Settings
Address Book Settings
Folder Service Settings
Job Flow Service Settings
Stored File Settings
Adjust Fold Position
Using DFA Finisher Profiles
Simple
Xerox ® Versant ® 80 Press
System Administration Guide