802.1X Information; Configuring 802.1X; Ip Filtering Information; Ip Filtering - Xerox Versant 80 Press System Administration Manual

802.1X Information

802.1X
802.1X is an Institute for Electrical and Electronics Engineers (IEEE) standard that defines
a method for port-based network access control or authentication. In an 802.1X secured
network, the press must be authenticated by a central authority, typically a RADIUS
server, before it can access the physical network.
You can enable and configure the press to be used in an 802.1X secured network.
Before you begin:
Ensure your 802.1X authentication server and authentication switch are available
on the network.
Determine the supported authentication method.
Create a user name and password on your authentication server.
Changing and applying 802.1X settings causes the press to restart. Ensure that the
press can be offline for several minutes.

Configuring 802.1X

1. In CentreWare Internet Services, click Properties > Security > IEEE 802.1X.
2. Next to Enable IEE E 802.1x select Enabled.
3. Under Authentication Method, select the method used on your network. Options are:
EAP-MD5
EAP-MS-CHAPv2
PEAP/MS-CHAPv2
4. Type the Login Name (Device Name) required by your authentication switch and
server.
5. Type the Password, then retype to verify.
6. Select Enabled next to Certificate Validation if necessary.
7. Click Apply to accept the changes or Undo to retain the previous settings.

IP Filtering Information

IP Filtering

You can prevent unauthorized network access by only allowing data to be transmitted
to and from specific IP addresses and ports.

Creating an IP Filter Rule

1. In CentreWare Internet Services, click Properties > Security > IP Filtering.
Xerox ® Versant ® 80 Press
System Administration Guide
Configure CentreWare Internet Services Settings
10-33