Adjust Paper Curl - Xerox Versant 80 Press System Administration Manual

Note
Two lines are printed on the image of side 1 and one line is printed on the image of
side 2 of the sample that is printed with Sample Printout to indicate the paper feed
direction.
16. Press Save.
17. Check the sample output, and adjust the position if misalignment has occurred.
18. After you finish making adjustments, print another output sample by pressing the
Sample Printout and verify the adjustment results.
19. Make adjustments again if necessary and press Save.
20. Press Save.
21. Press Close.
22. Select the tray to assign the set type (the tray in which you loaded the paper in Step
1), and press Change Settings.
23. Select the adjusted type, and press Save.
24. Select Close.
The main Tools screen displays.
25. Exit the administrator mode.

Adjust Paper Curl

Paper Curl Correction Overview
This feature allows you to select the desired paper curl setting in order to prevent your
output from curling.
When paper is exposed to heat, the paper loses moisture and curls toward the heat
source. High dry ink/toner coverage jobs tend to curl more due to the dry ink/toner
plastification effect on the paper surface.
Paper curl is caused by many variables, including:
The weight of the paper and whether it is coated or uncoated
The amount of dry ink/toner and the area being covered on a sheet: the heavier the
coverage, the greater the tendency to curl
How the paper is loaded in the tray; load the paper as instructed on the ream wrapper
The atmospheric conditions of the room where the paper is stored, especially those
related to humidity and temperature
The heat generated during the fusing processes
Tip
Successful paper curl correction varies from day to day. A successful setting used on one
day may not be successful on another day. This is especially relevant if the room in which
press is located experiences changes in temperature and humidity.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-19