Table of Contents
Advertisement
Adjusting Audio Settings
To adjust audio settings:
1. Click Sound on the navigation bar on the left. The Audio Setting window opens.
Figure 21.2 Audio Setting window.
2. Under the Live Audio drop-down menu, select ON or OFF to enable or disable live audio.
3. Under the Network Audio Transmission (2-way audio) drop-down menu, select ON or OFF to
enable or disable two-way audio.
4. Under the Network Audio Receive (1-way audio) drop-down menu, select ON or OFF to
enable or disable one-way audio.
5. Under the Keypad drop-down menu, select ON or OFF to enable or disable the button 'beeps'
on the DVR.
6. Under the Remote Control drop-down menu, select ON or OFF to enable or disable the
remote control "beeps".
7. Click OK to save your settings.
Web Remote Viewer
79
Advertisement
Table of Contents
