Configuring Your System To Send Notification E-Mails; User Management Tab - Lorex LH600 SERIES Instruction Manual

you a message when an event occurrs (i.e. a
motion event).
To use the Lorex e-mail server
1. Select the checkbox beside DEFAULT
SERVER (default).
The SERVER, PORT, SECURITY,
NOTE:
USER, PASSWORD fields gray-out if
DEFAULT is selected.
2. Beside TEST-EMAIL, click the PRESS
button.
• An email will be sent to your email address
entered under the USER MANAGEMENT
tab.
3. Click APPLY to save your settings.
To configure the e-mail server using custom
settings
:
1. De-select the check box beside DEFAULT
SERVER.
• The SERVER, PORT, SECURITY, USER,
PASSWORD fields can now be edited.
De-select Default Server
Figure 13.6 Configuring the e-mail server.
Enter your E-mail Server & Port Information
1. Double-click on the blank field beside
SERVER.
• The Virtual Keyboard opens.
2. Enter the e-mail server name using the
Virtual Keyboard.
3. Click OK to save your settings.
4. Double-click the field beside PORT.
• The Number window opens.
5. Enter the port number (specified by the
6. Click OK to save your settings.
:
Enter your E-mail User name and Password
1. Beside USER, double-click the blank field.
2. Enter your e-mail user name.
3. Click OK to save your settings.
Test your E-mail Account
Beside TEST E-MAIL, click the PRESS button
to verify that the system can properly connect
to your e-mail server.
Configuring Your System To Send
Notification E-Mails
To configure your system to send notification
e-mails, see "Appendix D: Enabling E-Mail
Notifications" on page 123.

USER MANAGEMENT TAB

The user management tab allows you to add,
remove and edit users who log in to the
system.
To open the User Management tab:
1. Click the USER MANAGEMENT tab on the
User Management tab
Figure 13.7 User management tab.
e-mail server).
• The Virtual Keyboard opens.
left.
• The User Management window opens.
Configuring System Setup
47