Restoring System Defaults - Lorex LH600 SERIES Instruction Manual

Configuring System Setup
4. Click the GET F/W button.
• The system searches for the firmware files
on your USB device.
Double-click here to begin
firmware upgrade
Figure 14.0 Firmware upgrade window.
5. Under F/W VERSION, double-click the
name of the firmware file.
• A firmware confirmation window opens.
Figure 14.1 Firmware upgrade confirmation window.
6. Click YES to upgrade the system firmware.
• When the firmware upgrade completes, a
success message window opens.
Figure 14.2 Firmware success window.
7. Click OK to restart your system.
50

Restoring System Defaults

To restore the system back to the factory
default configuration:
1. Beside FACTORY DEFAULT, click the
2. Enter your user name and password and
GET F/W button
3. Click YES to restore factory defaults.
4. Click YES to format the hard drive or click
PRESS button.
• A Login window opens.
then click OK.
• A warning window opens.
Figure 14.3 System factory default prompt.
• A Format Disk window opens.
Figure 14.4 Format disk prompt.
NO to continue without formatting the hard
drive.
• The system restarts itself and loads with
the factory settings.
Formatting the hard drive erases all
NOTE:
videos from the system.