Table of Contents
Advertisement
Web Remote Viewer
Configuring System Settings
Configuring Date and Time
To configure your DVR's date and time:
1. Click System on the navigation bar on the left. The Date/Time setting window opens.
Figure 21.3 Date/Time setting window.
2. Under the Date Format drop-down menu, select the format you want the dates to display.
• Date format options are: YYYY/MM/DD or MM/DD/YYYY or DD/MM/YYYY.
3. Under the Time Format drop-down menu, select 24-hour to enable 24-hour clock display.
Select AM/PM to enable 12-hour clock display.
4. Under Network Time Server Setup, type in the address you want the DVR to retrieve the time
(by default: POOL.NTP.ORG).
5. Under the Time Zone Setup drop-down menu, select your local time zone.
6. Under the D.S.T drop-down menu, select ON or OFF to enable or disable daylight savings
time.
7. Click OK to save your settings.
Configuring Network Settings
Adjusting DVR Bandwidth Speed
To adjust DVR bandwidth speed:
1. Click Network on the navigation menu on the left. The IP Setup Setting window opens.
Figure 21.4 IP Setup Setting window.
80
Bandwidth drop-down menu
Advertisement
Table of Contents
