Configuring Panic Recording Settings - Lorex LH600 SERIES Instruction Manual

• To configure each channel with specific recording parameters, click the Activation tab.
Configuring the Activation Tab
Figure 22.6 Activation tab.
To configure the Activation tab:
1. Select the recording type (Cont (continuous recording); Mot (motion recording); Cont/Mot
(continuous and motion recording) ); Alarm (alarm recording)
2. Drag your cursor across the channel bar to select the duration of recording.
• Optional: Select a second and third recording type (Cont, Mot, Cont/Mot) and drag your cursor
across the channel bar.
3. Use the Select All, Reverse All, Delete All buttons near the bottom of the window to
manipulate what you select.
4. Click OK to save your settings.
NOTE: You can mix recording types in a channel.

Configuring Panic Recording Settings

To configure Panic Recording Settings:
1. Click the Panic sub-menu on the navigation bar on the left (Record>Panic). The Panic
Recording Setting window opens.
Figure 22.7 Panic Recording Setting window.
89