Configuring your Road Warrior
Event Tab
Choosing What Events to Record
You can select the types of events that you
want the Road Warrior to record. For example,
you can have the Road Warrior record only
during emergency situations.
To choose the events you want the Road
Warrior to record:
• Select what type of events you want the
Road Warrior to record. Deselect the
events you do not want the Road Warrior to
record.
to save
Click OK
: Records events when the
Emergency
emergency button is pushed.
: Records events when a vehicle hits
Impact
a bump or object.
: Records events when the
Overspeed
vehicle reaches a certain speed.
: Records events when the
Sudden Stop
vehicle abruptly stops.
: Records when the vehicle
Sudden Start
accelerates quickly.
Changing Pre and Post Recording Time
When an event occurs, you can select how
many seconds you want the Road Warrior to
16
.
before
after
record
and
example, after an impact, you may want to view
5 seconds before the event, and 30 seconds
after the event.
Note that the NORMAL(Fps) frame rate must
be set to 1 for pre and post recording to work.
See "Changing Camera Frame Rate" on
page 15 for details.
To change pre and post recording time:
1. Drag the slider to the left to decrease the
duration (in seconds). Drag the slider to
the right to increase the duration (in
seconds).
Click OK
Adjusting Speed Settings
You can adjust what speed the "Overspeed"
event triggers a recording. For example, if you
set the speed setting to 88 m.p.h., the Road
Warrior will only mark an event as Overspeed
when your car reaches 89 m.p.h.
To adjust Speed Settings:
• Drag the slider left to decrease speed
settings; right to increase speed settings.
to save
Click OK
.
Adjusting Impact Sensitivity
To adjust impact sensitivity:
• From the Sensitivity drop-down menu,
select desired impact (
).
Normal
Click OK
the event. For
to save
.
,
,
Normal
High
to save
.