Appendix I: Connecting Audio Devices - Lorex LH600 SERIES Instruction Manual

Appendix I: Connecting Audio Devices

APPENDIX I: CONNECTING AUDIO DEVICES
You can connect one audio capable camera or one self-powered microphone to the system. Use
the Line Out port to connect the system to amplified speakers*.
AUDIO CAPABLE CAMERA
(not included)
OR
SELF-POWERED MICROPHONE
(not included)
To connect audio devices:
1. Connect the audio cable (RCA) from an audio capable camera to the AUDIO IN port on the rear
panel of the system.
2. Connect a line out/audio cable from amplified speakers (or other audio device) to the AUDIO
OUT port.
3. Open the MAIN MENU and select SYSTEM SETUP. If necessary, login with your user name
and password (by default, user name: ADMIN; password: 1234).
4. Click SOUND.
5. Configure Live Audio and select ON.
6. Beside NETWORK AUDIO TX and NETWORK AUDIO RX, select ON.
7. Click APPLY to save your settings.
8. Open the RECORD SETUP menu and select ADVANCED RECORDING.
9. Enable audio recording for each corresponding channel.
10. Click APPLY to save your settings.
*Audio capable cameras, self-powered microphones, and amplified speakers are not included
with the system.
132
DVR
LINE OUT / AMPLIFIED
SPEAKERS
(not included)