Configuring Recording Modes (Simple Recording); Enable Simple Recording Mode - Lorex LH600 SERIES Instruction Manual

3. Beside PRE EVENT RECORDING TIME, use the
recording time in seconds (1~5 seconds).
4. Beside POST EVENT RECORDING TIME, use the
recording time in seconds (5~180 seconds).
5. Click

CONFIGURING RECORDING MODES (SIMPLE RECORDING)

You can customize what time the system records in Contiuous, Motion or Alarm mode.
• Continuous recording mode sets the system to record in a loop, regardless if the camera
captures any movement.
• Motion recording only records when the camera detects movement.
• Alarm recording marks the video as an "Alarm" event when an external sensor (not included)
connected to the alarm block in the system is triggered.
To configure the type of recording mode during a particular time:

Enable Simple Recording Mode

1. Right-click anywhere in the main viewing window.
• The quick-menu opens.
2. Click
• The Record Setup menu opens.
Simple Recording Tab
Figure 7.2 Enabling Simple Recording mode.
3. Beside RECORDING MODE, select SIMPLE (default) using the
4. Click
to save your settings.
.
to save your settings.
Configuring Recording Settings
buttons to adjust the pre-event
buttons to adjust the post-event
Select SIMPLE (default)
buttons.
29