Adjusting Color Settings - Lorex DV700 Series Instruction Manual

9 Using the System
The Quick Menu has the following options:
• View: Select a camera in full-screen or select a multi-channel display.
• Pan/Tilt/Zoom: Access controls for PTZ cameras (not included).
• Camera Setting: Configure color settings for cameras.
• Info: Opens the system information window.
• Sequence: Click to start/stop sequence mode.
• In sequence mode, the system will automatically cycle through connected cameras
every few seconds.
• A will appear to show that sequence mode is on.
• Click the icon to pause sequence mode on the channel that is currently shown (icon
changes to ). Click again to resume sequence mode.
• Right-click and select Sequence to return to normal viewing mode.
• Disable Beep: Click to disable the current system beeping alarm.
• Search: Search/playback recorded video. See 12 Search (Playback), page 28.
• Manual: Open the Record menu to select manual recording options. See 11.3 Setting
up Scheduled or Manual Recording, page 25.
• Main Menu: Open the Main Menu. See 15 Using the Main Menu, page 46.

9.3 Adjusting Color Settings

Use the Camera Setting menu to adjust color settings for your cameras.
To adjust color settings:
1. Right-click on the channel you would like to configure and select Camera Setting. En-
ter the system password if prompted.
#LX400060; r.30328/30328; en-US
20