Table of Contents
Advertisement
REAR PANEL
1
2
Figure 1.4 Rear system panel (4-channel model shown).
DC 12V
1.
: Port for 12V power cable (included).
ETHERNET PORT
2.
included).
VIDEO IN
3.
: Camera input ports for BNC cameras; (4-channel configuration shown).
MONITOR
4.
: BNC output (top) to connect the system to a secondary monitor or DVR.
SPOT OUT
5.
: Spot Monitor output (bottom). Spot monitor only displays a single channel of a camera and
does not display system menus.
DVI
: DVI output to connect the system to a DVI monitor (not included). Use a DVI to VGA adapter (not
6.
included) to connect a VGA monitor to the system.
USB
7.
port: Connect a USB mouse to navigate the system.
8. AUDIO IN
: Connect one audio input device (i.e. amplafied microphone, not included).
AUDIO OUT
9.
: Connect a single audio output (i.e. speakers, not included).
ALARM Block
10.
: Connect external alarm, motion devices , or a PTZ (Pan Tilt Zoom) camera to the
system (not included).
PAL / NTSC
11.
: Switch between PAL and NTSC video output.
3
4
5
: Connect an Ethernet cable to connect the system to a router or switch (not
Keep the exaust fan on the side
panel clear for proper ventilation.
Inadequate ventilation causes the
unit to overheat.
6
7
8
Rear Panel
9
10
11
7
Advertisement
Table of Contents
