Table of Contents
Advertisement
2.3.2 Removing the SFP/SFP+ Transceiver
1.
Make sure there is no network activity by consulting or checking with the network administrator. Or through the
management interface of the switch/converter (if available) to disable the port in advance.
2.
Remove the fiber optic cable gently.
3.
Turn the lever of the SFP transceiver to a horizontal position.
4.
Pull out the module gently through the lever.
Never pull out the module without pulling the lever or the push bolts on the module. Directly pulling
out the module with force could damage the module and SFP module slot of the device.
Figure 2-3-2: Pull out the SFP/SFP+ Transceiver Module
48
Advertisement
Table of Contents
