Security; Access Security; Access Management - Planet Networking & Communication GS-5220 Series User Manual

4.6 Security

4.6.1 Access Security

4.6.1.1 Access Management

Configure access management table on this page. The maximum entry number is 16. If the application's type match any one of
the access management entries, it will allow access to the switch. The Access Management Configuration screen in
4-6-1-1 appears.
Figure 4-6-1-1: Access Management Configuration Overview Page Screenshot
The page includes the following fields:
Object
• Mode
• Delete
• VLAN ID
• Start IP address
• End IP address
• HTTP/HTTPS
• SNMP
• Telnet/SSH
User's Manual of GS-5220 LCD Series Managed Switch
Description
Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Check to delete the entry. It will be deleted during the next apply .
Indicates the VLAN ID for the access management entry.
Indicates the start IP address for the access management entry.
Indicates the end IP address for the access management entry.
Indicates the host can access the switch from HTTP/HTTPS interface that the
host IP address matched the entry.
Indicates the host can access the switch from SNMP interface that the host IP
address matched the entry.
Indicates the host can access the switch from TELNET/SSH interface that the
host IP address matched the entry.
289
Figure