4.6.7.2 VLAN Trunking between two 802.1Q aware switches
The most cases are used for "Uplink " to other switches. VLANs are separated at different switches, but they need to access
with other switches within the same VLAN group. The screen in
Setup steps
1.
Add VLAN Group
Figure 4-6-11: Check VLAN 2 and 3 Members on VLAN Membership Page
PC-2
PC-3
(Untagged)
(Tagged)
802.1Q VLAN Trunking
VLAN 2
PC-1
(Untagged)
Figure 4-6-12: VLAN Trunking Diagram
Figure 4-6-12
appears.
Sample Switch
Sample Switch
PC-4
(Untagged)
121
User's Manual of WGSW-48040HP
PC-5
PC-6
(Untagged)
(Tagged)
VLAN 3