Replacing The Opc Drum Unit - Panasonic DP-C323 Operating Instructions Manual

Replacing the OPC Drum Unit

ATTENTION
●
Replace the OPC Drum Unit of the colour shown on the touch panel display.
●
Be sure to use only Genuine Panasonic OPC Drum Unit designed for this machine.
●
Do not scratch or touch the surface of the OPC Drum with bare hands.
●
The OPC Drum Unit is sensitive to light. To prevent optical exposure problems, do not expose the OPC Drum Unit to
direct sunlight, or bright light.
●
Be careful not to soil your hands with the toner on the surface of the OPC Drum Unit.
1
Open the Front Cover.
●
Make sure that the machine has stopped
printing before opening the Front Cover.
2
Remove the Toner Waste Container.
Toner Waste Container
●
Exercise care not incline the container,
or Toner may spill.
3
Identify the location of the colour OPC
Drum Unit requiring replacement.
Yellow Magenta Cyan
●
When the windows are Yellow, close all of the
doors and turn the Main Power Switch OFF,
and ON again. After the machine completes
the warm-up routine, turn the Main Power
Switch OFF, and confirm that the windows are
BLACK prior to removing any drum.
80
Front Cover
Window
Black
4
Unlock the OPC Drum Unit by turning the
Drum Release Knob counterclockwise.
Drum Release Knob
5
Pull the old OPC Drum Unit out of the
machine.
Old OPC Drum Unit
●
Hold by the frame while pulling it out.
6
Open the box, and then pull the new
OPC Drum Unit out of the box. Remove
the plastic bag covering the new drum.
(It will be reused in step 12.)
New OPC Drum Unit