7 ] Acquire White Level Data And Set Cis Scanner Area (Function Code 55); 8 ] Set An Id Code And Update The Head Property Information - Brother DCP130C Service Manual

[ 7 ] Acquire white level data and set CIS scanner area (Function code 55)

Refer to Chapter 9, Section

[ 8 ] Set an ID code and update the head property information

NOTE: Make sure that the BHL2-Maintenance Printer driver has been installed to your PC. To do
it, click Start|Settings|Printers to call up the Printers window and confirm that the BHL2-
Maintenance Printer icon (shown on the sample window on
not been installed, install it referring to
(1) Make sure that your PC is turned off, then connect the machine to your PC using a USB cable.
(2) Switch your PC on.
(3) On your PC, run the ID/head property utility (brusbsn.exe) in the folder created in
The following window appears.
(4) On the model menu, click BH7.
9.4.10.
Section 7.1.2.
7-26
page 7-5) is displayed. If the driver has
Section 7.1.1.
Confidential