9 ] Acquire White Level Data And Set Cis Scanner Area (Function Code 55); 10 ] Update The Paper Feeding Correction Value (Function Code 58); 11 ] Align Vertical Print Lines (Function Code 65); 12 ] Adjust Margins In Borderless Printing (Function Code 66) - Brother MFC-J6510DW Service Manual

If restoring of the machine information ends successfully, [ 9 ] to [ 12 ] and [ 16 ] are not required.

[ 9 ] Acquire white level data and set CIS scanner area (Function code 55)

Refer to Chapter 5, Section

[ 10 ] Update the paper feeding correction value (Function code 58)

Refer to Section 4.1 [ 5

[ 11 ] Align vertical print lines (Function code 65)

Refer to Section 4.1 [ 7

[ 12 ] Adjust margins in borderless printing (Function code 66)

Refer to Section 4.1 [ 8

[ 13 ] Create head calibration data and write it into flash ROM (Function code 02)

Refer to Section 4.1 [ 9
If restoring of head calibration data ends successfully in [ 6 ] above, this procedure is not
required.

[ 14 ] Print out an ADF copy chart and make a copy of that chart in ADF scanning

Refer to Section 4.3 [ 1

[ 15 ] Print out a total quality check pattern

Refer to Section 4.1 [ 10

[ 16 ] Adjust the touch panel (Function code 78) (For models with touch panel)

Refer to Chapter 5, Section

[ 17 ] Switch back to standby

Refer to Section 4.1 [ 11
5.1.4.15.
].
].
].
].
].
].
5.1.4.29.
].
4-39 Confidential