Brother DCP130C Service Manual page 293

Selector
No.
1
Head-platen gap offset
(Prevention of stains
2
on recording paper)
3 Paper feed amount compensation
| (for preventing banding at the leading edge
5 of recording paper fed from the photo tray)
Registration time offset to slipping in plain
6
paper feeding
7 Unidirectional print for higher print quality
8 Improvement of paper feeding reliability
Selectors 1 and 2: Head-platen gap offset (Prevention of stains on recording paper)
If using curled or thick recording paper results in a stained print face of the paper, increase the gap
between the head nozzles and the platen with these selectors to reduce the production of stains.
Enabling the head-platen gap offset increases the gap to 1.6 or 2.3 mm if it was 1.3 or 1.6 mm,
respectively. (The details are given in the table below.)
In borderless printing, even if enabled by these selectors, the head-platen gap offset becomes
disabled except when the Brother premium glossy photo paper is used with the "Photo" or
"Highest" print quality selected.
Recording Print quality
paper selected
Brother "Highest"
premium glossy
"Photo"
photo paper
"Fine"
Other glossy "Highest"
paper
"Photo"
"Fine"
Inkjet paper "Photo"
"Fine"
Plain paper "Fine"
(except the
"Normal"
above)
"Fast Normal"
"Fast"
In the above table, values in parentheses are not changed since the offset is automatically disabled.
AMS02
(Printing assurance 2)
Function
For glossy paper
For recording paper
except glossy paper
Head-platen gap offset (specified by selector 1 or 2)
OFF ON for glossy paper
Using A4,
letter, or legal
paper in
borderless
printing
1.3 mm 1.6 mm
1.3 mm 1.6 mm
1.6 mm (1.6 mm)
1.6 mm (1.6 mm)
1.6 mm (1.6 mm)
1.6 mm (1.6 mm)
1.6 mm
1.6 mm
---
1.6 mm
1.6 mm
1.6 mm
1.6 mm
9 - 4 6
Setting and Specifications
0: Disable (default)
0: Disable (default)
No. 3 4 5
0 0 0 : Enable for 4 x 6
postcards (default)
1 0 0 : Enable for Photo L-size
paper in Japan
Others : Disable
0: Disable (default)
0: Disable (default)
0: Disable (default)
ON for recording paper
except glossy paper
In printing with Using A4,
borderless letter, or
printing OFF, legal paper
or using paper in borderless
except A4, printing
letter, and legal
paper
1.6 mm
1.6 mm
---
2.3 mm
2.3 mm
2.3 mm
2.3 mm
(1.6 mm)
(1.6 mm)
---
(1.6 mm)
(1.6 mm)
(1.6 mm)
(1.6 mm)
1: Enable
1: Enable
1: Enable
1: Enable
1: Enable
In printing with
borderless
printing OFF,
or using paper
except A4,
letter, and legal
paper
---
2.3 mm
2.3 mm
2.3 mm
2.3 mm
2.3 mm
2.3 mm
Confidential