Brother DCP130C Service Manual page 272

-- Specify the CIS type --
(1) Open the scanner cover and check the CIS bar code label on the scanner cover.
(2) Enter 5 and 9 in the initial stage of the maintenance mode using the / and OK keys.
The "1:MO 2:CO 3:CHG?" appears on the LCD.
(3) To call up the CIS type menu, enter 3 using the / and OK keys.
(The "1:MO" is for checking the CIS travel, as described on the previous page. The "2:CO" is
for checking scanning clocks at the factory, so do not access it.)
The "CIS C:0 R:1 L:2" appears on the LCD.
(4) If the CIS type is "B" (Canon), enter 0 using the / and OK keys; if "A" (Rohm), enter 1; if
"C" (Lite-On), enter 2.
Upon completion of the entry, the machine returns to the initial stage of the maintenance mode.
Bar code label
A: Rohm
B: Canon
C: Lite-On
9 - 2 5
(CIS_LABEL)
Confidential