Brother DCP130C Service Manual page 342

Selector
No.
Delay time for starting "no tone"
1
detection in the external TAD
2
mode
Threshold level of "no tone"
3
detection in the external TAD
4
mode
5
Pause between paging number
|
and PIN
7
8 Not used.
NOTE: Selectors 1 through 4 are not applicable to the U.S.A. models, models without "no tone"
detecting function in the external TAD mode, or models with Rockwell modem V24.
NOTE: Selectors 5 through 7 are applicable to the U.S.A. models only.
Selectors 1 and 2: Delay time for starting "no tone" detection in the external TAD mode
These selectors take effect only in the external TAD mode. The machine delays starting detection of
"no tone" by the time length specified by these selectors.
The total length of the delay time specified by these selectors and the maximum waiting time
specified by WSW21 (selectors 1 through 5) should not exceed 40 seconds.
Selectors 3 and 4: Threshold level of "no tone" detection in the external TAD mode
These selectors specify the threshold level of "no tone" detection in the external TAD mode.
Selectors 5 through 7:
These selectors set the pause time between a telephone number being paged and PIN (personal
identification number) for the paging feature.
WSW25
(TAD setting 3) (Not used.)
Function
Pause between paging number and PIN
App. 4-29
Setting and Specifications
No. 1 2
0 0: 0 sec.
0 1: 8 sec.
1 0: 16 sec.
1 1: 24 sec.
No. 3 4
0 0: -43 dB (A)
0 1: -46 dB (B)
1 0: -49 dB (C)
1 1: -51 dB (D)
No. 5 6 7
0 0 0 :
0 0 1 :
0 1 0 :
0 1 1 :
1 0 0 :
1 0 1 :
1 1 0 :
1 1 1 :
2 sec.
4 sec.
6 sec.
8 sec.
10 sec.
12 sec.
14 sec.
16 sec.
sec.: second(s)
Confidential