Brother DCP130C Service Manual page 238

(5) In Port on the BrUsbSn screen (on the previous page), select the port number assigned to the
BHL2-Maintenance Printer. If the port number is unknown, follow the instructions given in
Section 7.2 [ 1 ], step
(6) In the Serial No box on the BrUsbSn screen, type the 9-digit serial number (e.g., D6F111101)
printed on the nameplate labeled to the machine as an ID code.
(7) In the Head Info. box, type the 15-digit property code (e.g., ALR778402F00000) which is
printed on the bar code label attached to the lower cover. Click the OK button.
Head property label
(Bar code label)
(8) Check whether the entered character strings (ID code and head property information) are
correct with the following procedure.
Enter 8 and 0 using the / and OK keys. Then press the Black Start (Mono Start) key
several times, and the ID code appears on the LCD. Check that the displayed code is that string
entered in step (6).
Next, enter 6, 8, 2, 5, 8, and 0 using the / and OK keys, and the head property code appears
on the LCD. Check that the displayed code is that string entered in step (7).
(9) If both are OK, proceed to [ 9 ] below.
If something wrong is displayed, check the connection between the PC and machine and go back
to step (2).
(8).
Serial number label
7-27
(app01b)
(app01d)
Confidential