Brother DCP130C Service Manual page 286

(Note 2) This machine counts all purge operations and flushing operations performed since produced in
order to prevent the ink absorber box and flushing box from overflowing with drained and
flushed ink, respectively. An initial purge, for example, advances the counter by 163 + 432 =
595. When the purge or flushing counter approaches 9600 or 475852272, respectively, the
"MACHINE ERROR 46" appears, and further purge or flushing operations are prohibited.
Replace the ink absorber box and flushing box, and then reset their counters with the following
procedure.
Resetting purge or flushing counter
1) Press the Menu and Black Start (Mono Start) keys. Next press the
make the machine enter the maintenance mode.
The machine displays "
in the initial stage of the maintenance mode, a mode in which the machine is ready to
accept entry from the keys.
2) Enter 8 and 0 using the
call up the machine's log information. (Function code 80. Refer to
3) Press the Black Start (Mono Start) key several times until the purge or flushing count
appears on the LCD.
4) To reset the purge or flushing count, enter 2, 7, 8, and 3 using the
5) Press the Stop/Exit key to return the machine to the initial stage of the maintenance
mode.
6) To exit from the maintenance mode, enter 9 twice using the
/ and OK keys in the initial stage of the maintenance mode to
9 - 3 9
" on the LCD, indicating that it is placed
Section
/ and OK keys.
/ and OK keys.
key four times to
9.4.21.)
Confidential