Brother DCP130C Service Manual page 72

Purge types, ink usage, purge counts, and purge codes
Purge Types
This purge operation removes
Normal purge
dried ink sticking to the head
nozzles.
This purge operation removes
Periodical reset
any bubbles that have
purge
accumulated in the ink supply
tubes.
Power purge More powerful than a
periodical reset purge, this
purge operation is for
removing stubborn clogging
from the head nozzles and ink
supply tubes.
When the user loads ink
Initial purge
cartridges for the first time,
this purge operation
automatically runs to refill the
ink supply tubes and print head
with fresh ink.
User reset purge This purge operation should be
performed if the print quality
problem persists after a user
has performed the purge
operation repeatedly by
pressing the Ink (Ink
Management) key.
Engine setup This purge operation refills the
ink supply tubes with ink when
purge
there is no ink in those tubes.
To enter a numerical code on models having no numerical keypad, press the / key several times to
*
display the numerical code to be entered on the LCD and then press the OK key. After that, press the
Black Start (Mono Start) key.
Description
Black:
Per color: 0.13 mL
Black:
Per color: 0.32 mL
Black:
Per color: 0.38 mL
Black:
Per color: 2.59 mL
Black:
Per color: 0.32 mL
Black:
Per color: 2.59 mL
3-32
Ink Usage Purge Counts
0.21 mL Black: 11
Total of
colors: 21
0.44 mL Black: 24
Total of
colors: 54
0.59 mL Black: 32
Total of
colors: 64
2.92 mL Black: 163
Total of
colors: 432
0.50 mL Black: 28
Total of
colors: 54
2.92 mL Black: 163
Total of
colors: 432
Purge Codes
(In the maintenance
mode, Function
code 76)
*
1
2
3
4
5
6
Confidential