Table 148 Configuration > Object > DHCPv6 > Request (continued)
LABEL
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Type
Interface
Value
27.2.1 Add/Edit DHCPv6 Request Object
The Request Add/Edit screen allows you to create a new request object or edit an existing one.
To access this screen, go to the Request screen and click either the Add icon or an Edit icon.
Figure 164 Configuration > Object > DHCPv6 > Request > Add
The following table describes the labels in this screen.
Table 149 Configuration > Object > DHCPv6 > Request > Add/Edit
LABEL
Name
Request Type
Interface
OK
Cancel
Chapter 27 DHCPv6
DESCRIPTION
use the entry.
This field is a sequential value, and it is not associated with a specific object.
This field displays the name of each request object.
This field displays the request type of each request object.
This field displays the interface used for each request object.
This field displays the value for each request object.
DESCRIPTION
Type the name for this request object. You may use 1-31 alphanumeric characters,
underscores(_), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Select the request type for this request object. You can choose from DNS Server, or NTP
Server.
Select the interface for this request object.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
NXC Series User's Guide
287