Edit User Authentication Timeout Settings - ZyXEL Communications NXC2500 User Manual

Table 101 Configuration > Object > User/Group > Setting (continued)
LABEL
Apply
Reset

17.4.1 Edit User Authentication Timeout Settings

This screen allows you to set the default authentication timeout settings for the selected type of
user account. These default authentication timeout settings also control the settings for any
existing user accounts that are set to use the default settings. You can still manually configure any
user account's authentication timeout settings.
To access this screen, go to the Configuration > Object > User/Group > Setting screen, and
click one of the Default Authentication Timeout Settings section's Edit icons.
Figure 113 User/Group > Setting > Edit User Authentication Timeout Settings
The following table describes the labels in this screen.
Table 102 User/Group > Setting > Edit User Authentication Timeout Settings
LABEL
User Type
Lease Time
Chapter 17 User/Group
DESCRIPTION
Click Apply to save the changes.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
This read-only field identifies the type of user account for which you are configuring the
default settings.
• admin - this user can look at and change the configuration of the NXC
• limited-admin - this user can look at the configuration of the NXC but not to change it
• user - this user has access to the NXC's services but cannot look at the configuration.
• guest - this user has access to the NXC's services but cannot look at the configuration.
• ext-user - this user account is maintained in a remote server, such as RADIUS or LDAP.
• ext-group-user - this user account is maintained in a remote server, such as RADIUS
or LDAP.
• guest-manager - this user can log in via the web configurator login screen and create
dynamic guest accounts using the Master Manager screen that pops up.
• dynamic-guest - this user has access to the NXC's services within a given period of
time but cannot look at the configuration.
Enter the number of minutes this type of user account has to renew the current session
before the user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to make
the number of minutes unlimited.
Admin users renew the session every time the main screen refreshes in the Web
Configurator. Access users can renew the session by clicking the Renew button on their
screen. If you allow access users to renew time automatically, the users can select this
check box on their screen as well. In this case, the session is automatically renewed before
the lease time expires.
NXC Series User's Guide
205