System; Chapter 28 System; Overview; What You Can Do In This Chapter - ZyXEL Communications NXC2500 User Manual

28.1 Overview

Use the system screens to configure general NXC settings.

28.1.1 What You Can Do in this Chapter

• The Host Name screen
your network.
• The USB Storage screen
USB devices.
• The Date/Time screen
• The Console Speed screen
you connect to the NXC via the console port using a terminal emulation program.
• The DNS screen
used for mapping a domain name to its corresponding IP address and vice versa.
• The WWW screens
the NXC and how the login and access user screens look.
• The SSH screen
accessing the NXC's command line interface. You can specify which zones allow SSH access and
from which IP address the access can come.
• The Telnet screen
command line interface. Specify which zones allow Telnet access and from which IP address the
access can come.
• The FTP screen
access the NXC. You can also specify from which IP addresses the access can come. You can
upload and download the NXC's firmware and configuration files using FTP. Please also see
Chapter 30 on page 343
• The SNMP screen
from which zones SNMP can be used to access the NXC. You can also specify from which IP
addresses the access can come.
• The Auth. Server screen
RADIUS server.
• The Language screen
NXC's Web Configurator screens.
• The IPv6 screen
C
(Section 28.2 on page
(Section 28.3 on page
(Section 28.4 on page
(Section 28.5 on page
(Section 28.6 on page 294) configures the DNS (Domain Name System) server
(Section 28.7 on page
(Section 28.8 on page 312) configures SSH (Secure SHell) for securely
(Section 28.9 on page
(Section 28.10 on page 318) specifies from which zones FTP can be used to
for more information about firmware and configuration files.
(Section 28.11 on page
(Section 28.12 on page
(Section 28.13 on page
(Section 28.14 on page 327) enables or disables IPv6 support on the NXC.
NXC Series User's Guide
288
HAPTER
289) configures a unique name for the NXC in
289) configures the settings for the connected
290) configures the date and time for the NXC.
294) configures the console port speed when
301) configure settings for HTTP or HTTPS access to
317) configures Telnet for accessing the NXC's
320) configures the device's SNMP settings, including
324) configures the device to operate as a
326) sets the user interface language for the
2 8

System