ZyXEL Communications NXC2500 User Manual page 402

Table 204 Interface Logs
LOG MESSAGE
Interface %s has been
deleted.
Interface %s has been
changed.
Interface %s has been
added.
Interface %s is
enabled.
Interface %s is
disabled.
Interface %s links
down. Default route
will not apply until
interface %s links up.
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u,UpTime=%s
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u
Interface %s connect
failed: MS-CHAPv2
mutual authentication
failed.
Interface %s connect
failed: MS-CHAP
authentication
failed.
Interface %s connect
failed: CHAP
authentication
failed.
Interface %s connect
failed: Peer not
responding.
Interface %s connect
failed: PAP
authentication
failed.
Interface %s create
failed because has no
member.
Appendix A Log Descriptions
DESCRIPTION
An administrator deleted an interface. %s is the interface name.
An administrator changed an interface's configuration. %s: interface name.
An administrator added a new interface. %s: interface name.
An administrator enabled an interface. %s: interface name.
An administrator disabled an interface. %s: interface name.
An administrator set a static gateway in interface but this interface is link
down. At this time the configuration will be saved but route will not take effect
until the link becomes up.1st %s: interface name, 2nd %s: interface name.
Port statistics log. This log will be sent to the VRPT server.
1st %s: physical port name, 2nd %s: physical port status, 1st %u: physical
port Tx packets, 2nd %u: physical port Rx packets, 3rd %u: physical port
packets collisions, 4th %u: physical port Tx Bytes/s, 5th %u: physical port Rx
Bytes/s, 3rd %s: physical port up time.
Interface statistics log. This log will be sent to the VRPT server.
1st %s: interface name, 2nd %s: interface status, 1st %u variable: interface
Tx packets, 2nd %u variable: interface Rx packets, 3rd %u: interface packets
collisions, 4th %u: interface Tx Bytes/s, 5th %u: interface Rx Bytes/s.
MS-CHAPv2 authentication failed (the server must support mS-CHAPv2 and
verify that the authentication failed, this does not include cases where the
servers does not support MS-CHAPv2). %s: interface name.
MS-CHAP authentication failed (the server must support MS-CHAP and verify
that the authentication failed, this does not include cases where the server
does not support MS-CHAP). %s: interface name.
CHAP authentication failed (the server must support CHAP and verify that the
authentication failed, this does not include cases where the server does not
support CHAP). CHAP: interface name.
The interface's connection will be terminated because the server did not send
any LCP packets. %s: interface name.
PAP authentication failed (the server must support PAP and verify verify that
the authentication failed, this does not include cases where the server does not
support PAP).
A bridge interface has no member. %s: bridge interface name.
NXC Series User's Guide
402