Warning Messages - ZyXEL Communications NXC2500 User Manual

Table 14 Configuration Menu Screens Summary (continued)
FOLDER OR LINK
SNMP
Auth. Server
Language
IPv6
Log & Report
Email Daily
Report
Log Settings
3.3.2.4 Maintenance Menu
Use the maintenance menu screens to manage configuration and firmware files, run diagnostics,
and reboot or shut down the NXC.
Table 15 Maintenance Menu Screens Summary
FOLDER OR LINK
File Manager
Diagnostics
Packet Flow
Explore
Reboot
Shutdown

3.3.3 Warning Messages

Warning messages, such as those resulting from misconfiguration, display in a popup window.
Figure 16 Warning Message
Chapter 3 The Web Configurator
TAB FUNCTION
Configure SNMP communities and services.
Configure the NXC to act as a RADIUS server.
Select the Web Configurator language.
Enables or disables IPv6 support on the NXC.
Configure where and how to send daily reports and what reports
to send.
Configure the system log, e-mail logs, and remote syslog servers.
TAB FUNCTION
Configuration File Manage and upload configuration files for the NXC.
Firmware Package View the current firmware version and to upload firmware.
Shell Script Manage and run shell script files for the NXC.
Diagnostic Collect diagnostic information.
Packet Capture Capture packets for analysis.
Core Dump Connect a USB device to the NXC and save the NXC operating
system kernel to it here.
System Log Connect a USB device to the NXC and archive the NXC system
logs to it here.
Wireless Frame Capture wireless frames from APs for analysis.
Capture
Routing Status Check how the NXC determines where to route a packet.
SNAT Status View a clear picture on how the NXC converts a packet's source IP
address and check the related settings.
Restart the NXC.
Turn off the NXC.
NXC Series User's Guide
40