ZyXEL Communications NXC2500 User Manual page 404

Table 205 WLAN Logs (continued)
LOG MESSAGE
Incorrect username or
password for WPA or
WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
System internal error.
%s: STA %s could not
extract EAP-Message
from RADIUS message
Table 206 Account Logs
LOG MESSAGE
Account %s %s has been
deleted.
Account %s %s has been
changed.
Account %s %s has been
added.
Table 207 Force Authentication Logs
LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!
Appendix A Log Descriptions
DESCRIPTION
A wireless client used an incorrect WPA or WPA2 user name or user password
and failed authentication by the NXC's local user database while trying to
connect to the specified WLAN interface (first %s). The MAC address of the
wireless client is listed (second %s).
There was an error when attempting to extract the EAP-Message from a
RADIUS message. The first %s is the WLAN interface. The second %s is the
MAC address of the wireless client.
DESCRIPTION
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
A user changed an ISP account profile's options.
1st %s: profile type, 2nd %s: profile name.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
DESCRIPTION
Force user authentication will be turned on because HTTP server was turned
on.
Force user authentication will be turned off because HTTP server was turned
off.
NXC Series User's Guide
404