Firmware Package - ZyXEL Communications NXC2500 User Manual

Table 179 Maintenance > File Manager > Configuration File (continued)
LABEL
Size
Last Modified
Upload
Configuration
File
File Path
Browse...
Upload

30.3 Firmware Package

Click Maintenance > File Manager > Firmware Package to open this screen. Use the
Firmware Package screen to check your current firmware version and upload firmware to the
NXC.
Note: The Web Configurator is the recommended method for uploading firmware. You
only need to use the command line interface if you need to recover the firmware.
See the CLI Reference Guide for how to determine if you need to recover the
firmware and how to recover it.
Find the firmware package at www.zyxel.com in a file that (usually) uses the system model name
with a .bin extension, for example, "nxc.bin".
The firmware update can take up to five minutes. Do not turn off or reset
the NXC while the firmware update is in progress!
Chapter 30 File Manager
DESCRIPTION
This column displays the size (in KB) of a configuration file.
This column displays the date and time that the individual configuration files were last
changed or saved.
The bottom part of the screen allows you to upload a new or previously saved
configuration file from your computer to your NXC
You cannot upload a configuration file named system-default.conf or lastgood.conf.
If you upload startup-config.conf, it will replace the current configuration and
immediately apply the new settings.
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .conf file you want to upload. The configuration file must use a
".conf" filename extension. You will receive an error message if you try to upload a fie of a
different format. Remember that you must decompress compressed (.zip) files before you
can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
NXC Series User's Guide
349