Figure 78 Configuration > Network > NAT > Add/Edit
The following table describes the labels in this screen.
Table 76 Configuration > Network > NAT > Add/Edit
LABEL
DESCRIPTION
Create new
Use to configure any new settings objects that you need to use in this screen.
Object
Enable Rule
Use this option to turn the NAT rule on or off.
Rule Name
Type in the name of the NAT rule. The name is used to refer to the NAT rule. You may use
1-31 alphanumeric characters, underscores(
cannot be a number. This value is case-sensitive.
Chapter 11 NAT
NXC Series User's Guide
153
), or dashes (-), but the first character
_