Frequently Asked Questions - Xerox DocuColor 12 Getting To Know Manual

Resources

Frequently asked questions

How long is the warm-up period?
How fast is the printer in full color
How fast is the printer in black and
What happens when I run out of
one color dry ink (toner)?
What happens if I accidentally put
the wrong color dry ink cartridge
into the printer?
Getting to Know Your Product
Product Orientation Guide
For more information, refer to the following publications:
DocuColor 12 Printer User Guide
DocuColor 12 Printer System Administration Guide
DocuColor 12 Material Usage Guide
The DocuColor 12 Printer takes about 8 minutes after the power is
switched on before it is ready to make prints.
About 12 full color prints per minute, depending on the paper size
mode? and feeding orientation of the paper.
Approximately 50 prints per minute using 8.5 x 11 in. or A4 paper
white mode? being fed long edge first.
The printer gives you a warning message on the touch screen to
order more dry ink when a particular color dry ink is running low.
When the ink supply is exhausted, the printer will not make prints
in that color until the dry ink cartridge is replaced.
You can't. Each dry ink cartridge is keyed so it will only insert into
the proper color housing.
18