The User Interface - Xerox DocuColor 12 Getting To Know Manual

The User Interface

Identify the components of the user interface. Point
out each item as you discuss it. See Figure 5.
1. The UI Panel will display messages depending
on print job function.
2. The Contrast Dial is used to adjust the bright-
ness of the touch screen.
3. The Control Panel Buttons provide control of
the machine.
• The Keypad buttons 0 through 9 are used to
enter a password. The C button clears an
incorrect entry.
• (Administration) - used by the System
Administrator.
• (Access) - brings up the Access screen to
allow entry of a password when the printer is
in the password mode.
• (Energy Saver) - puts the printer into a
low power mode. Press the Energy Saver
button again to bring the printer back to full
power after the warm-up period.
• CA - Clears all programming. Places all set-
tings at their default values.
• (Interrupt) &
tional on printer configuration only.
• (Start) - Initiates a job or continues the
printing process.
4
(Stop) - Non-func-
2 3
1
Figure 5
Getting to Know Your Product
C A
3
1 2
4 5 6
8 9
7
* 0 #
C
Product Orientation Guide