Xerox DocuColor 12 Getting To Know Manual page 20

Replacing a dry ink cartridge
Replacing dry ink
You need to replace dry ink when the Touch Screen dis-
plays a message indicating that one of the color dry inks
is low.
1. See Figure 23. Open the front door of the DocuColor
12 Printer. (See Figure 18 on page11.)
2. Place some paper on the floor to catch any spillage.
3. Remove the dry ink cartridge to be replaced by turn-
ing the cartridge counterclockwise until the large
arrow on the cartridge aligns with the unlocked
symbol on printer.
4. Pull the cartridge out of the housing and dispose of
it according to local regulations.
5. Remove the new dry ink cartridge from the package.
6. Shake the cartridge from side to side vigorously for
at least 15 seconds.
7. Align the arrow on the top of the cartridge with the
raised arrow at the top of the housing and push the
cartridge all the way in.
8. Turn the cartridge clockwise until the large arrow
on the cartridge is aligned with the locked symbol
on the printer. This locks the cartridge into place.
Note: You cannot lock a cartridge into an incorrect
housing.
9. Close the front door of the printer. See Figure 24.
10. Remove the paper from the floor.
16
4
3
6
8
Figure 23
9
Figure 24
Getting to Know Your Product
Product Orientation Guide
7