Loading Paper In Tray 5; Loading Paper In The High Capacity Feeder - Xerox DocuColor 12 Getting To Know Manual

Loading paper in tray 5

Demonstrate how to open tray 5 and load paper. See
Figure 8.
1. Open tray 5 by swinging the door down.
2. Extend the tray.
3. Load paper and slide it toward the printer until
it stops.
4. Adjust the rear paper guide to the size of the
paper.
Note: When 12 x 18 in. paper is used, the front
paper guide also must be readjusted by loosening the
thumbscrew, moving the guide, then tightening the
thumbscrew.

Loading paper in the high capacity feeder

Note: The high capacity feeder is an option and may
not be present.
Demonstrate loading paper into the high capacity
feeder. See Figure 9.
1. Open the drawer by pulling it straight out.
2. Place a stack of paper in the drawer, pushing the
paper all the way to the right. Straighten the
stack so the edges are even.
3. Close the drawer by pushing it in toward the
printer.
6
4
3
2
Figure 8
2
Figure 9
1
3
1
Getting to Know Your Product
Product Orientation Guide