Xerox DocuColor 12 Getting To Know Manual page 5

Carrier session overview
Orientation topics
Length of session
What to expect from the Carrier session
Product Orientation Guide
Customer Information Section
Additional training
Evaluation questionnaire
Getting to Know Your Product
Product Orientation Guide
This product orientation session will include these topics:
• Usage and control
• Document management
• Paper supply
• Access areas for jam clearance
• Location of power switch and serial number plate
This product orientation session will last about 10 minutes.
Note: This brief overview is not intended as a formal training session.
Discusses key topics to help you get acquainted with your new product.
This Guide is yours to keep so that you can review the information or
provide this same orientation to your colleagues, if you wish.
This section contains a series of self-guided activities designed to
increase your product knowledge. It can be used at your own pace. As
you complete these activities, you are encouraged to consult the
DocuColor 12 Digital Printer User Guide on the Customer
Documentation CD-ROM for additional information.
If after reviewing all of the information above you feel you need
additional training, please contact your Sales Agent, who will assist
you.
Xerox values your comments about this orientation. They are essential
to helping us continue to improve our products and services.
• After you have reviewed all of the information, please take a moment
to fill out and return the evaluation questionnaire located at the
back of this publication.
• If several people participate in the orientation session, please feel
free to have them fill out additional questionnaires so that all partic-
ipants can complete it.
1