Brake Light Switch; Cable Inspection And Lubrication - Yamaha YXZ10YEXR Owner's Manual

(a) (a) (a)
(b) (b) (b)
1. Rubber cover
2. Adjusting nut
3. Locknut
7. Turn the adjusting nut in direction (a) to
increase the free play or in direction (b) to
decrease the free play.
8. Tighten the locknut, and then slide the
rubber cover to its original position.
9. Install the panel.
3 3 2 2 2 1 1
EBU36620

Brake light switch

The brake light, which is activated by the
brake pedal, should come on just before
braking takes effect. Since the brake light
switch is a component of the YCC-S system,
it must be adjusted by a Yamaha dealer, who
has the necessary professional knowledge
and experience.
EBU32561

Cable inspection and lubrication

EWB03380
WARNING
Damaged cables could restrict operation,
which may cause an accident or injury. In-
spect control cables frequently and re-
place damaged cables. Corrosion can
result when the outer covering of control
cables becomes damaged. Cables can
also become frayed or kinked.
9-56
9